|
DESCRIPTION
Charter Oak™ and Charter Oak XL - 4-1/2" clapboard profile. Each 9-inch wide horizontal siding panel is nominally configured as two 4-1/2" panels in the clapboard style. Panels shall have exclusive TriBeam™ panel system.
LENGTH : 12 ft. 1 in. (Charter Oak XL length shall be 16 ft. 8 in.)
WIDTH: 9 in.
DESCRIPTION
Charter Oak™ and Charter Oak XL- 4-1/2" dutch lap profile. Each 9-inch wide horizontal siding panel is nominally configured as two 4-1/2" panels in the dutch lap style. Panels shall have exclusive TriBeam System design which includes a one-piece panel reinforcement system and double-thick nail hem.
LENGTH: 12 ft. 1 in. (Charter Oak XL length shall be 16 ft. 8 in.)
WIDTH: 9 in.
DESCRIPTION
Board & Batten. Each 7-inch wide vertical siding panel is nominally configures as one panel in the board and batten style.
LENGTH: 10 ft. 0 in.
WIDTH: 7 in.
|
|
DESCRIPTION
Williamsport® Colonial Beaded - 6-1/2" beaded profile. Each 6-1/2" wide horizontal siding panel is nominally configured as one panel in the beaded style.
LENGTH: 12 ft. 4 in.
WIDTH: 6-1/2 in.
DESCRIPTION
CenterLock - 4-1/2" clapboard profile. Each 9-inch wide horizontal siding panel is nominally configured as two 4-1/2-inch panels in the clapboard style. Panels shall have exclusive Alside center lock.
LENGTH: 12 ft. 1 in.
WIDTH: 9 in.
DESCRIPTION
CenterLock - 4-1/2" dutch lap profile. Each 9-inch wide horizontal siding panel is nominally configured as two 4-1/2-inch panels in the dutch lap style. Panels shall have exclusive Alside center lock.
LENGTH:12 ft. 1 in.
WIDTH: 9 in.
DESCRIPTION
Odyssey® Plus - 5" clapboard profile. Each 10-inch wide horizontal siding panel is nominally configured as two 5-inch panels in the clapboard style.
LENGTH: 12 ft.
WIDTH: 10 in.
DESCRIPTION
Odyssey® Plus - 5" dutch lap profile. Each 10-inch wide horizontal siding panel is nominally configured as two 5-inch panels in the dutch lap style.
LENGTH: 12 ft.
WIDTH: 10 in.
DESCRIPTION
Odyssey® Plus and Landscape™- 4" clapboard profile. Each 8-inch wide horizontal siding panel is nominally configured as two 4-inch panels in the clapboard style.
LENGTH: 12 ft. 6 in.
WIDTH: 8 in.
|
|
DESCRIPTION
Odyssey® Plus and Landscape™ - 4" dutch lap profile. Each 8-inch wide horizontal siding panel is nominally configured as two 4-inch panels in the dutch lap style.
LENGTH
12 ft. 6 in.
WIDTH
8 in.
DESCRIPTION
Seneca™ and Conquest® - 4-1/2" clapboard profile. Each 9-inch wide horizontal siding panel is nominally configured as two 4-1/2" panels in the clapboard style.
LENGTH: 12 ft. 1 in.
WIDTH: 9 in.
DESCRIPTION
Seneca™ and Conquest® - 4-1/2" dutch profile. Each 9-inch wide horizontal siding panel is nominally configured as two 4-1/2" panels in the dutch lap style.
LENGTH: 12 ft. 1 in.
WIDTH: 9 in.
DESCRIPTION
Conquest® - 3" clapboard profile. Each 9-inch wide horizontal siding panel is nominally configured as three 3-inch panels in the clapboard style.
LENGTH: 12 ft. 1 in.
WIDTH: 9 in.
|
|
THICKNESS: Please refer to specific product descriptions for thickness specifications.
EMBOSSING: Siding panel to match the sample provided under section 1.03.
COLOR: Siding color shall be as specified by architect.
INTERLOCK: Siding panels are made with post-form style lock with positive interlock. Both ends of the panel are factory cut and notched for overlap.
NAIL SLOTS: Elongated nail slots 1" long are spaced approximately 1/4" apart in the nailing hem to allow siding to expand and contract properly.
WEEP HOLES: Small holes under the bottom butt prevent vapor build-up and allow accumulated moisture to escape.
|
|
2.03
A. Accessories:
Accessories shall be consistent with the shape, size and properties as shown in the drawing and as required for complete installation. Color shall be matched or color coordinated to the siding according to the architect's specifications. Accessories shall be produced from the same compound materials and with comparable properties as the siding.
PART 3 EXECUTION
3.01
A. Examination
Confirm that all critical dimensions are as specified in the drawings.
B. Commencement of siding installation implies acceptance of the substrate as suitable to accept siding.
3.02
A. Preparation
Any substrate flaws or defects must be repaired before the vinyl siding is applied. Vinyl siding must be applied to walls that are in plane and free from obstructions. Furr where necessary.
3.03
A. Installation
Install in accordance with the latest edition of the "How to Install Vinyl Siding and Soffit," published by the Alside. Included in the application should be any special details from the drawings.
B. The vinyl siding and accessories shall be installed in accordance with the best practice, with all joint members plumb and true.
3.04
A. Field Quality Control
After installation of siding check entire surface for obvious flaws or defects. Replace and repair any problem areas, paying close attention to the substrate for causes of the problem.
3.05
A. Clean-up
After the vinyl siding has been applied, clean as necessary to remove all fingerprints and soiled areas. Upon completion of the siding application, the entire area is to be cleaned, removing all scrap, packaging and unused building materials.
Listed by Underwriters Laboratories Inc.
Class A rated material.
Alside, Conquest, Greenbriar, Odyssey and Williamsport are registered trademarks of Alside, Inc.
|
![TTB_NoTag_4c[2]](../assets/images/TTB_NoTag_4c_2_.JPG "TTB_NoTag_4c[2]"){kind=small}
